不积跬步,无以至千里;不积小流,无以成江海。

机械师F117-B6 黑苹果 Hackintosh 10.14.x/10.15.x EFI

黑苹果 康康 9253℃ 14评论

本配置在 I7-8750H GTX1060 的f117-b6 测试通过,其他机型请自测;

理论上支持 intel z370主板 8代I7系列的笔记本

一、安装准备

安装前要做什么?

我的配置:

  • CPU:I7-8750H
  • 屏幕:京东方 1080P/144hz
  • 内存:32GB 挚科DDR4 2666 X 2
  • WFFI/蓝牙:BCM94360CS2( 拆机卡 ) 免驱
  • 硬盘:PM981 m.2(256G)装win / 光威 m.2(512G)装mac

安装之后要做什么?

  • 安装 OpenCore Configurator 、HackTools 黑果必备
  • 拷贝u盘的EFI到硬盘EFI分区以便脱离u盘引导
  • 开启Hidpi,视觉效果更佳 ,参考:https://www.chenweikang.top/?p=932
  • 关闭-v模式(Clover引导下)
clover:选中-v然后删掉,保存即可

功能描述

  • 板载有线网络正常
  • USB端口、摄像头正常
  • 机械师fn+1一键强冷可用、声音背光快捷键可用
  • 触控板支持完整的macbook手势
  • 睡眠、唤醒 正常
  • 电源管理、CPU变频 正常
  • 声卡驱动 正常
  • 关机、重启 正常
  • 蓝牙/无线 更换网卡(可选DW1560/WD1830/拆机卡BCM94360CS2),推荐拆机卡,完美
  • 独显无法驱动、由于HDMI和DP都是走独显因此也无法外接屏幕
  • OC已支持原生NVRAM,强烈推荐使用OC配置

二、EFI下载

1.OC配置下载区:

release-20210220

  • 更新到opencore 0.6.6 release(mod);
  • 基于 OpenCore For Mod : http://bbs.pcbeta.com/viewthread-1838814-1-1.html
  • 更新相关驱动,默认为1820a网卡配置,免驱卡请自行移出config里的1820a相关配置(mod版本使用occ修改配置时请切换到mod版本模式);
  • 支持 big sur mac 11.1;
  • 修复触摸板失效问题;

release-20200809

  • 更新到opencore 0.6.0 release;
  • 更新相关驱动,新增1820a网卡配置;
  • mac 11.0 暂未测试,有条件可自行尝试;
  • 以后下载全部迁移到git,直接点击版本号直达下载

release-20200406

release-20200330

2.Clover配置下载区:

release-20200328

release-20191104

release-20190701

三、常见问题

1)升级到10.15挂载系统为读写权限,终端执行命令(前提关闭SIP):

sudo mount -uw /

killall Finder

2)允许所有来源的软件

sudo spctl --master-disable

3)开启Hidpi:

https://www.chenweikang.top/?p=932
推荐用此方法开启HIDPI

4)每次更新系统后发现触控板失效:

使用hackintool重建缓存

点击重建缓存,完成后重启即可

5)修复深度睡眠空间

点击修复深度睡眠空间

四、图和真相

预览
显示器
USB
PCIE
GPU跑分
桌面

五、写在最后

参考了黑果小兵博客:https://blog.daliansky.net/

参考了补丁:https://github.com/daliansky/OC-little

为手残党有偿提供远程技术支持:QQ - 354867750

转载请注明:左手代码右手诗 » 机械师F117-B6 黑苹果 Hackintosh 10.14.x/10.15.x EFI

喜欢 (12)or分享 (0)
发表我的评论
取消评论

 

表情

Hi,您需要填写昵称和邮箱!

  • 昵称 (必填)
  • 邮箱 (必填)
  • 网址
(14)个小伙伴在吐槽
  1. 博主OC都0.6拉~~快适配更新一下~
    wahaha2020-07-18 22:13 回复
    • 等oc0.6正式版出了我会同步更新的
      康康2020-07-19 10:39 回复
      • 嗯嗯谢谢博主大大 🙂
        wahaha2020-07-19 10:44 回复
  2. Hello my friend, this is my model here https://www.hackintosh-montreal.com/t10393-nouveau-projet-machenike-laptop. please help me with EFI/BOOT folder with catalina https://www.aliexpress.com/item/4001152797094.html feel free to contact me thank you.
    Frenchieman2020-08-09 00:53 回复
    • You can refer to this EFI: https://www.chenweikang.top/wp-content/uploads/2020/08/Mechrevo-X10TI-X3S-OC-V0.6B.zip ,This EFI is tested by Mechrevo (X3S X10TIS Z3 Z3AIR) 10th model
      康康2020-08-09 08:45 回复
      • I got Ok for BOOT 🙄 ....only in Asian language 😮 , no way to change from english or french please 😛 ? If not, i'll try it...i can figure it out i guess 😆
        Frenchieman2020-08-09 11:53 回复
  3. Ok bro it’s not possible, install is fine but at first screen all is in Chinese characters
    Frenchieman2020-08-09 12:36 回复
  4. Ok so i managed to change the language everything ok, camera, audio, video UHD 630 but no Kext for Nvidia RTX2060...no wifi (i have AX200) i'll search for other kexts...bluetooth is connected but no detection...i'm testing everything right now, thank you for this Zip package my friend.
    Frenchieman2020-08-09 13:04 回复
    • You need to replace the wireless card (bcm94360cs2 or dw1820a). Although the ax200 can drive, but it's not perfect.
      康康2020-08-10 20:14 回复
      • Yes Wifi Ok with a USB dongle from EDUP, i have those 3 models, all work fine https://fr.aliexpress.com/item/32857849823.html https://fr.aliexpress.com/item/32894337387.html I didn't find any kext for internal Ax200 Wifi6 intel...any idea ?
        Frenchieman2020-08-13 09:09 回复
        • MacOS doesn't support wifi6. An Intel Wifi Adapter Kernel Extension for macOS, based on the OpenBSD Project.: https://github.com/OpenIntelWireless/itlwm
          康康2020-08-14 16:40 回复
  5. bigsur睡眠后屏幕不唤醒
    aaa2020-11-14 23:16 回复
    • 我还没更新,有空折腾一下
      康康2020-11-15 19:55 回复
      • 好的,辛苦大佬了
        aaa2020-11-16 00:46 回复